This way you will know how much tilt your car’s wheels have

Do you want different wheels on your car? Then there are several sizes you need to consider. In this article we will discuss the pitch of the wheels.

If you want different wheels for your car, it’s not just the pitch size that’s important. The ET value also has to be right to maintain the same driving characteristics and of course you have to pay attention to the diameter of the wheel, the width of the wheel and the diameter of the hub hole.

The distance between your car’s wheels

These are all pretty simple numbers, but pitch size doesn’t give you a single number. For example, it says “4×100”. And no, the pitch is not 400.

The first number

The pitch number has a simple structure. Most cars have 4, 5, or 6 holes for screws to go through. The first number refers to the number of screws. So it’s a question of counting.

The second number

The second part of the number refers to the distance between the screws. You will need to remove a wheel from the car to measure the distance between the mounting holes. You measure from the center of one screw hole to the center of the opposite screw hole. In cars, the inclination is often between 100 and 140 millimeters.

Do you find it too difficult to measure the stitch size yourself? Then there are numerous tools on the Internet that will help you. Still, it can be a nice feeling to measure yourself when you spend a lot of money on a nice set of new wheels.