Do you know the correct way to clean your headphones without damaging them?

Everyone has at some point heard about the damage that listening to too loud music does to the ears; however, lack of hygiene of headphones can also cause a number of hearing problems as well as spoil your hearing. technological device.

Moisture, earwax or excessive sweating are the most common causes of hearing aid failure. It is necessary to maintain a perfect state of cleanliness of the headphones for a proper functioning.

According to some manufacturers of these devices, “Dust, earwax and other debris can build up on the headphones and make the sound muffled or prevent the headphones from charging properly”. Many times this makes you think that the headphones are of poor quality or damaged, but this is just a lack of hygiene.

How to clean headphones?

Learning how to clean headphones is important, since it is a technological device that is used every day. With the pandemic, the number of people using them has increased, and they are in a sensitive area that could cause serious problems.

Depending on the model, earwax can accumulate between the pads or rubbers. For this, It is also advisable not to share earphones as they can become carriers of bacteria and fungi.

Manufacturers like Apple, Samsung, Sony or Google we recommend using a soft, lint-free cloth to gently clean the headphones.

For cleaning, we recommend that you follow these tips that we leave you below:

There is no rule as to how often you should clean your headphones. The answer depends largely on when and how you use them.

If you use them in the sun to listen to music or text, you can clean them at least once a week to prevent dirt build-up, but if you use them at the gym or when you go for a run, you should dry them and lightly clean them after each use. . You will prevent damage and ear infections.

Intra-ear or intra-ear headphones (those that are placed in the ear).

First you need to remove the silicone rubbers from the speakers. Clean the grille of the headphones with a dry toothbrush, preferably a brand new one, or a small brush with soft bristles.

Moisten, do not soak, a cloth with alcohol and gently wipe it over the metal mesh and around the earpiece. Put warm water and a few drops of soap or detergent in a bowl and put the rubber bands of the earphones on. This step is very important if what you are looking for is to clean the wax from the headphones. Let it sit for 5 minutes, then remove the silicone rubbers and dry them well.

Headphones with headband.

These headphones are the ones that go over the ears and cover them.

Mix warm water and soap or detergent in a bowl. Next, wet the cloth with soapy water and use it to wipe the cushions and the fabric covering the speaker grill. You will then need to thread the fabric through the inside and outside of the body of the headband.

Then they need to be dried and left in an airy place until they are completely dry. Finally, moisten a cloth or cotton wool with alcohol and go over the pads only. And finally, dry them well before use.

headphones for iphone

both headphones AirPods Like those in this style, they are not waterproof or waterproof. Therefore, in order to perform a proper cleaning, you should do the following:

The first thing is to remove any residue that might be on the speaker grilles and the charging box with a clean brush, dry and preferably soft bristles. Then gently remove the stains from the grill or microphone with a cotton ball.

Moisten the cloth with alcohol and wipe it only on the outside of the charging case. Avoid placing or adding anything to the charging ports.

Always remember wear gloves and never leave hearing aids outside the box.